Large component painting plant
Large components like parts of earth moving or big machines are shot-blasted, followed by primer and top coats of paint. The primer coat is followed by top coat which is normally PU paint and is force dried in the oven at 70-300°C.
These pants can be supplied with separate booths and curing ovens with material movement for large sized components or a combined Spray booth cum curing oven may be provided.
Power Source Options
- Main Power Supplies 415 Volt, 50 Hz, 3 phases, 4 wire A.C. system only.
Features
- Heavy Duty Construction
- Low Maintenance
- Easy to Assemble
- Re-circulates Shop air
Heat Sources
- Electric
- Gas (Natural or LPG)
- Fuel Oil
- Steam
- Other Fuel Mixtures
Specifications
- Booth canopy is made from 1.2 mm thick GI joint sheet metal panels.
- Water Screen is made from 1.6 mm thick Stainless Steel 304 grade sheet.
- Baffles made from 1.2 mm thick GI sheet metal panels.
- Maintenance door is bolted.
- Water collection tank is made from 2 mm thick SS 304 sheet with suitable angle iron stiffening.
- Modular design ensures easy installation and expansion.
- ALL MS Parts are Two coats of epoxy primer and two coats of enamel finish paint.
- ALL GI Parts are All GI Panels are Powder Coated.
- Access to the interior of the oven, fan, and heating chamber
- Temperature Ranges up to 200°C or as per requirement.
