POWDER COATING BATCH OVEN
Powder materials require a certain amount of thermal energy applied for a certain time to produce the chemical reaction needed to cross-link the powder into a film. The powder material will melt when exposed to heat, flow into a level film and then begin to chemically cross-link before ultimately reaching full cure. Various methods can be used to supply the energy needed for cure.
Application
Batch ovens use a heat source ( usually Electric/Gas/Diesel) and fan to distribute and circulate air through a duct inside the oven. The heated air will in turn heat the part and then the coating. Batch ovens are the most common type of cure oven used for powder. As the part reaches peak temperature it will conduct heat into the coating and cause the powder to cure and give desired finish.
Powder Coating Batch Oven can come up in these options Electric/Gas/Diesel/Steam and many more.
Options
- Exhaust Blower
- Vertical Door
- Front & Back Door
- Forced Exhaust
- PID Controller with SSR/SCR
- Thyristor
- PLC with HMI
- Blower – Heater Interlock
- Observation Window & Illumination
- Spare Parts
Specifications
| Design | Batch Type/ Modular/ Cassette Type |
| Outer Chamber Construction | HR/CR. |
| Inner Chamber Construction | MS Sheet, SS Sheet, or GI Sheets. |
| Insulation | Rock wool/ Mineral wool |
| Temperature Ranges | Ambient to 150°C /250°C |
| Air Circulation | Vertical, Horizontal or Combination |
| Paint | Enamel Paint / Epoxy Coating / Powder Coating |
| Temperature Uniformity | ± 5°C. |
| Control Panel | GBM Make. |
| Trolley with Track | Yes |
| Heating Element | SS Tubular Electrical Heaters / Imported Diesel Fired Burner / Imported Gas Fired Burner |
| Inner Finish | High Temperature Aluminium Finish |
| Outer Finish | Double Coat Enamel Paint |
Note: Customised option available as per customer requirement.
